PDA

View Full Version : SFI-45.1 roll cage padding


Special Ed GT
03-11-2008, 01:46 PM
Hey, gang, if any of you need padding for your new race cars, I have SFI-45.1 roll cage padding that I can deliver to the track. This is the type of padding that fits halfway around the tube; has a cross-section of approx. 20mm (somewhere around 13/16" if you're a knuckle-dragger :) ) at its thickest point with tapered edges. It has adhesive on the inside where it attaches to the bar, but I recommend using zip ties to help secure it. Each length is approx. 36"; NASA racer price is $18.17 plus tax per length.

RichV
03-11-2008, 07:18 PM
How long are the sections? 36"?

Special Ed GT
03-11-2008, 07:27 PM
Each section is 35 3/4" long.

BADVENM
03-11-2008, 07:28 PM
Tech question, will it be required that the padding adhesive be applied to the cage or can I zip tie it only? Reason being someday I would like to paint the cage and would end up wasting some rather expensive padding by peeling it back off, uterly making it useless.

Special Ed GT
03-11-2008, 07:30 PM
Zip tie only is fine.

leggwork
03-11-2008, 10:04 PM
if it came to that, spray adhesive, or double sided tape would restick it.
cheers,
bruce

Tech question, will it be required that the padding adhesive be applied to the cage or can I zip tie it only? Reason being someday I would like to paint the cage and would end up wasting some rather expensive padding by peeling it back off, uterly making it useless.